Hold It Mate

Hold It Mate Planter Box Kit

Planter boxes are usually attached to the top of a railing, essentially blocking a view with hardware that can scratch a hand rail and isn’t at all versatile. With the Hold It Mate System, you are able to attach a planter box at any height you like on a railing. Facing inside your deck/balcony or outside to show off your flowers. Hold It Mate connects with an included Allen wrench to vertical spindles that are round, square, wood, PVC, aluminum or wrought iron and are a ½ inch to 1½ inches wide. It provides a near universal fit with no damage.

Hold It Mate Extension Hook & Rail

The extension hook on a 6-inch rail gives the consumer an option to hang a 12-inch potted plant, a bird feeder, or decoration items such as wind chimes on their railing without drilling into their deck posts or railings and to hang at any height desired, inside their railing or outside. Hold It Mate connects with an included Allen wrench to vertical spindles that are round, square, wood, PVC, aluminum or wrought iron and are a ½ inch to 1½ inches wide. It provides a near universal fit with no damage.

Hold It Mate System with Planter Rings

Use the 48-inch Hold It Mate System to create a multitude of looks on your deck or balcony. With this example, we used two 10-inch rings and pots in the middle, with two 8-inch rings and pots on the ends. The System essentially disappears, leaving the pots to appear to be floating! Face inside your deck or outside! Hold It Mate connects with an included Allen wrench to vertical spindles that are round, square, wood, PVC, aluminum or wrought iron and are a ½ inch to 1½ inches wide. It provides a near universal fit with no damage.

Hold It Mate Shelf Kit

The UV Treated Cedar shelf sits atop shelf brackets connected to the proprietary Hold It Mate System. It gives a balcony/deck owner a shelf for potted plants, a desktop to work at, or a side table next to the grill. Set the shelf at any height, down low is nice — in between two chairs to hold beverages and a light. Hold It Mate connects with an included Allen wrench to vertical spindles that are round, square, wood, PVC, aluminum or wrought iron and are a ½ inch to 1½ inches wide. It provides a near universal fit with no damage.

For more information, visit www.holditmate.com