Growers shared their favorite mechanical helpers at the ANLA/WNGA’s New Ideas program on the trade show circuit this year. These innovations were presented at the Mid-America Horticultural Trade Show in
Water wagon Bergman Nurseries, in
Armed with an 1,100-gallon water tank, the water wagon is pulled by a tractor with a creeper gear. The tank sets on a trailer with flotation tires. The tank is equipped with spray bars made of 1 1/2-inch PVC. The bars extend a few inches past the tractor tires. Small holes are drilled into the bars about 6 inches apart. The wagon uses a PTO pump to pressurize the PVC pipe. An in-line filter helps to reduce clogging. The tractor drives 5 mph and makes two passes, resulting in 6-8 inches of water penetration for its shade and evergreen trees. Two workers can apply 7,000 gallons per day with this system. During two years of drought, the nursery has experienced less than 5 percent loss due to lack of water. For more: Bergman Nurseries, (217) 222-1424; www.bergmannurseries.com. Cinch tying machine L.E. Cooke Co., a bare-root tree nursery in
“Before, when we had cinch-strapping machines, our peak employment was around 350 people and we had 14-18 people per tying crew,” said Phillip Cox, operations and sales at L.E. Cooke. “Our new tying machines require only four to six people per crew.” The machine’s cycle time is 3 seconds per tie. In the field it operates with a 10-amp generator. It has an adjustable tension range from 6 to 120 pounds. For more: L.E. Cooke Co., (559) 732-9146; www.lecooke.com. Alliance Packaging, (800) 998-8996; www.alliancepkg.com. Selective Inverted Sink Shur Farms in
The medium-sized unit comes with a 15-horsepower engine. The SIS works best with trees that have at least 12 inches of trunk below the branches. It’s designed to alleviate radiation frost. For more: Shur Farms, (877) 842-9688; www.shurfarms.com. Fanntum Grabber Worthington Farms in
The Fanntum Grabber is an attachment to a tractor or loader. The grabber arm hydraulically swings out on a hinge, pivoting so the tractor or loader doesn’t move, he said. “The arms are actuated to squeeze the container, it is then lifted and rotated back in front of the machine, driven to the road and placed on a trailer,” he said. The arms can be changed to lift even bigger containers by pulling hitch pins and replacing each of the two half-moon frames with larger ones. For more:
Speed Lacer Harry Bitel, owner of Bitel Innovations in
The Speed Lacer is adjustable for ball diameter, height or degree of taper. It mechanically secures the twine around the trunk of the tree by using hook-style baskets that are exclusive to Bitel Innovations. The machine power crimps the basket in a pigtail style to tighten the ball into a uniform shape. For more: Bitel Innovations, (810) 395-4101; www.movethattree.com. Tree cart Imperial Nurseries wanted to reduce costs associated with shipping and handling No. 15 and No. 25 containers; reduce lifting-related injuries; and increase loading efficiencies. Greg Elwell, Chuck Golden and Mike Clark developed a tree cart that reduced labor, handling damages and cost per unit. The two-wheeled cart has two handles and one main support bar. The container is supported by a platform along with two side panels. The $400 tree cart was fabricated to design specifics by vocational students. {sidebar id=2} For more: Imperial Nurseries, (800) 950-6051; www.imperialnurseries.com. July 2008